The Hames closure fitting is paired with a hand creased, single edge design, one and a quarter inch leather belt strap. Not confined by holes as with most belts, this cinch belt style has a range of fit of about 4". Use of the 2 piece harness fixture is unique to say the least. Its longer "tongue" piece pivets (swivels) to slip through the fixed brass piece on the left and comes back over itself to securely close the belt.
This belt is made to order and is usually not usually in stock at the physical store in Maplewood. Please call with any questions. 314-932-1475
|Belt Width:||1 1/4"|
|Origin:||Made in USA|
Measure a belt that you already have from the tip of the buckle to the hole most often used.
This measurement will tell you what size to order. Or using a cloth tape measure, measure around your waist going thru the loops of your pants and pull it just to.
For Example: If the measurement is 36" then order a 36".
Note: If in between sizes, order the larger size.